9. Main parameters of the plan:

Machine power consumption: 55kw

Marking range: 100mmX100mm

Gas used: compressed air

Rated pressure: 0.7MP

Flow requirement: 1 m3/min

Nitrogen or argon purity 99.5%-99.999%

Flow requirement: 0.06 m3/min

Electrical requirements:

Rated output voltage: 380V

Voltage frequency: 50Hz

Three-phase voltage stability: +5%

Capacity: 45KW

Overall machine size: 11000mmX2500mmX2000mm (length X depth X height)

9.1. Transmission fiber (taking IPG laser as an example)

The lasers produced by IPG usually come with their own transmission optical fiber, and this shipment is no exception. It is also the original optical fiber that comes standard with IPG lasers.

9.2. The characteristics of the welding joint are as follows:

1. Suitable for all solid-state lasers with high radiation quality

2. Suitable for higher laser power

3. Achieve stable welding with the help of high-quality optical system

4. The optical system is equipped with anti-fouling protection

5. Scalable process monitoring

9.3. The main parameters of laser welding joints are as follows:

1. Maximum laser power that can be carried (6 kW)

2. Aiming focal length (optional 75 mm, 100 mm, 125 mm, 150 mm)

3. Focusing focal length (120 mm ~ 250 mm)

4. Quality

5. Size (standard module) 50 x 50 mm (edge size)

9.4. The main parameters of SCANLAB’s scanning galvanometer are as follows:

Repeatability: <>μrad

Zero point drift: 30μrad/k

Gain drift: 80ppm/k

Scan angle: ±0.35rad

Gain error: <>±0.01

Interface:

Analog mode: ±4.8V

Digital mode: XY2-100

Working temperature: 25℃±10℃

10. Easily worn consumables

1. Welding protection lens: lens ф30mm*1.5mm/, gasket ф28mm*1mm

2. Marking protective lenses

3. Smoke filter

4. Short circuit test probe

5. Air-tight nozzle

6. Pneumatic gripper