How to use laser marking machine  

1. Laser marking machine

1. After checking the water pipeline and circuit, it can be turned on;

2. Turn on the power and turn on the key switch. The machine's air extraction and cooling system are powered on,

3. Turn on the power of the galvanometer;

4. Turn on the computer and the file to be marked;

5. Adjust the power of the laser to the working current (10 ~ 18A)

6. After adjusting the marking focal length, you can start working

2. Steps to turn off the marking machine,

1. Lower the working current of the laser power supply

2. Turn off the computer;

3. Turn off the power of the galvanometer;

4. Press the stop button;

5. Turn off the key switch

6. Disconnect the power supply.